Wednesday, January 28, 2015

Prairie Points Part 2 – Folding

Prairie-points-1_thumb27
This is the second installment of the Prairie Point Tutorial series.
**************************************************
(Note: if you’ve been following this blog for at least a few months, this part of the series will seem familiar!  I’m repeating some info to gather all the prairie point information together.)
I’ll share how to fold two different styles of prairie points.  Whether you choose the first or second method, the information from Prairie Points Part 1, about sizing and calculating how many points you’ll need, will apply.



Prairie Point #1

Step 1. Start with a square, wrong side of fabric facing up. I’m using a 3 1/2” square, which yields a 1 1/2” tall finished point.

IMG_9219

Step 2. Fold the square in half once on the diagonal.  Press the fold.

IMG_9220

Step 3. Fold in half again. Press the fold.  I like to hit it with a little steam to help set the folds. There you go.  One prairie point.
IMG_9221IMG_9222

All the raw edges are now together on the long side of the triangles, which is the same length as the side of the square you started out with (in this case 3 1/2”).

Once this triangle in sewn onto something with a 1/4 seam along the long side, the finished base (long side) will be 3 ” long. To illustrate, in the picture below pretend the ruler is the quilt edge, with the prairie point seam allowance taken up in the seam.
IMG_9223
And you can see that the vertical distance from point to finished base is 1 1/2”.
IMG_9224
You can lay out your prairie points in various ways.
IMG_9225
Alternate triangle on top and triangle on bottom
IMG_9226
One point underneath the previous triangle, one point on top of the next one.
IMG_9228
One point tucked into the folds of the previous triangle, and so on down the line.

And just when you thought I had gotten sidetracked with layouts and forgotten, here’s a second method for folding the points.

Prairie Point #2

Step 1. Start with a square, wrong side of fabric facing up.  This one is also a 3 1/2” square.
IMG_9234
Step 2. Fold in half along the vertical to form a rectangle.
IMG_9235IMG_9236

Step 3.  The top of the rectangle should be the folded edge. Fold  one corner down to reach the middle of the bottom edge.  Press the fold.
IMG_9237
Step 4. Fold the remaining corner down.  Press.  Again, I like to use a little steam to set the fold.  The raw edges should now all be along the long edge of the triangle that will be hidden in the seam allowance when you attach the prairie point to your quilt.
IMG_9239IMG_9240

One side of the prairie point will have folds down the middle (above right), while the other side will be a plain triangle (below).  The triangle measures 3 1/2” along the long side and 1 3/4” high.  That will be 3” long and 1 1/2”” high finished when sewn to your quilt with a 1/4” seam allowance.
IMG_9241
*************************************************
For more information about prairie points, check out the rest of the Prairie Point tutorial series:

9 comments:

  1. Thanks for the tute! I have never attempted prairie points and you make them look easy to create but I am not sure about how easy they are to sew to a quilt. I am looking forward to seeing them on your quilt. I bet it is gonna look fantastic.

    ReplyDelete
  2. Great tutorial! I never knew about the second method... might have to try that one on something next year.

    ReplyDelete
  3. I think I would also get tired of ironing prairie points and need to make a runner. The only time I have sewn with prairie points was when repairing a quilt my grandmother made. One interesting thing was that she basted them all together in the seam allowance before sewing them to the quilt. It made the repair much easier.

    ReplyDelete
  4. Great tutorial Joanne! I did two different methods yet again for prairie points that were actually sewn down on my Seaside Rose quilt. Needless to say, by the end of the quilt, the phrase, prairie points, was like nails on a blackboard, which had a double border of them...think it's called Sawtooth? Gnashing of teeth for me anyhow, lol! Love them though.

    ReplyDelete
  5. Great illustrations Joanne - I liked that you showed the different ways to layer your prairie points! Good Luck with all the ironing!

    ReplyDelete
  6. Thank you for this wonderful tutorial on prairie points. At the end, I think that you meant to write, When sewn into your quilt with a 1/4" seam allowance, instead of, "1 1/4" seam allowance," right? Not sure, as I've never done them.

    ReplyDelete
    Replies
    1. Yes, that's what I meant! Thanks for catching the typo. I have corrected it!

      Delete
  7. Great tutorial. I will keep this post handy when I attempt to do this for reference.

    ReplyDelete
  8. I've never seen the second method before. Another great tutorial!

    ReplyDelete

Thank you for visiting. I truly appreciate your comments and will try to reply to comments by email if your commenting staus is not set to "no-reply".

If you have a question, emailing me directly at joanne@canuckquilter.com will ensure I have your address to respond. I promise I will not share your email address and I will not use it for any purpose other than replying to your message.